Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Electron Microscopy Sciences SEM TM-3000 Angle Mount 22° Angle 25 mm Head, Aluminum
SEM specimen mount for TM1000/TM3000 with EDS Analysis Systems. These angled mounts feature an orientation cross for precise positioning towards the EDS detector. A tilt provides better detection and higher signal-to-noise ratio for x-ray analysis. Made from Aluminum.
Head: 25 mm
Electron Microscopy Sciences SEM TM-3000 Angle Mount 25° Angle 25 mm Head, Aluminum
SEM specimen mount for TM1000/TM3000 with EDS Analysis Systems. These angled mounts feature an orientation cross for precise positioning towards the EDS detector. A tilt provides better detection and higher signal-to-noise ratio for x-ray analysis. Made from Aluminum.
Head: 25 mm
Electron Microscopy Sciences Recessed SEM Clamp, 25 x 15 mm, 3.2 mm
Achieve background-free imaging and no contact with sample surface in imaging area with this 5 mm recessed clip. Clamping area is 25 mm (1") long x 15 mm (0.6") wide. Maximum thickness: 7 mm under the clamping strips. Made of machined aluminum with brass screws.
Size: 25 x 15 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences Wafer Cleaving Station with Mat
The Cleaving Station includes two diamond scribes for marking and scribing, one pen style diamond scribe and pliers for cleaving, everything in the Cleaving Kit. In addition, the Lattice Scriber, customized with an 8 point diamond tip that scribes well at any angle and small sample cleaving pliers are included so that a clean cleave is always possible on samples from a few mm's to 300 mm. The standard configuration includes one each:
Pen style, straight tip, and 30 degree tip Diamond Scribes Tweezers with black soft fiber fine tip
CleanBreak waferand small sample cleaving pliers
Small self-healing ruler mat and wafer piece ruler mat
Clear plastic ruler with metric and US units
Tungsten cleaving wire
LatticeScriber diamond scriber customized with and 8 point diamond tip
Electron Microscopy Sciences V-1 Quality, 20 mm diameter, 0.15- 0.21 mm thick
EMS Mica Sheets offer a clean surface for EM applications, carbon filming and particle spraying, as well as for AFM applications. There are two types of mica: muscovite and phlogopite. Generally, one differs from the other by color (Muscovite is Ruby, Green or White; Phlogopite is Amber, Yellow, or Silver). The maximum operating temperature for Muscovite is about 500-600 degree C and for Phlogopite is about 800-900 degree C. Our line consists of High Quality Muscovite Mica. This mica peels off very thin up to 0.0001" uniform layers, exposing "virgin" mica upon splitting.
Muscovite, potash type mica, sometimes known as granitic mica, is the best of all micas in dielectric strength, perfection of cleavage, and transparency. It has the chemical formula: H2KAI3(Si04)3. Clear. Hard, of uniform color, nearly flat, free of all stains, foreign inclusion, cracks, and other similar defects.
Quality: V-1
Size: 20 mm dia
Thickness: 0.15- 0.21 mm
Electron Microscopy Sciences MicroMounts™ Crystal Tool with 50 µm Aperture and SPINE pin
MicroMounts are the high performance tools for manipulating and mounting protein crystals, virus crystals, and small molecule/inorganic crystals, and other small, fragile samples. They are ideal for both conventional and high-throughput X-ray crystallography applications.
Each consist of a thin (7.5um thick) micro-fabricated polyimide film, attached to a solid non-magnetic stainless steel pin. Film is wrapped around the steel pin and it provides excellent stiffness and convenient scoop-like action in retrieving and handling crystals.
Aperture: SPINE pin
Electron Microscopy Sciences MicroMounts™ Crystal Tool with 50 µm Aperture and 19 mm pin
MicroMounts are the high performance tools for manipulating and mounting protein crystals, virus crystals, and small molecule/inorganic crystals, and other small, fragile samples. They are ideal for both conventional and high-throughput X-ray crystallography applications.
Each consist of a thin (7.5um thick) micro-fabricated polyimide film, attached to a solid non-magnetic stainless steel pin. Film is wrapped around the steel pin and it provides excellent stiffness and convenient scoop-like action in retrieving and handling crystals.
Aperture: 19 mm pin
Electron Microscopy Sciences Scale with Cross Line Microscope Graticle NE7, 23 mm, 10 mm with 0.1 mm spacing
Used as a horizontal and a vertical scale, they are especially useful when interested in measurement in different axis. Horizontal micrometer scale 10mm long with crosslines at 0.1mm spacing. Surface chrome image.
Size: 23 mm
Divisions: 10 mm with 0.1 mm spacing
Surface: Chrome image
Electron Microscopy Sciences CryoCapsule HPM100 Leica HPF adaptor
For CryoCapsule correlative light and electron microscopy high pressure freezing cell.
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 38 mm head with 6 mm Pin, Aluminum, 1/8" Pin diameter
SEM stub specimen mount with shorter pin (6 mm) and 38 mm slotted head for use with Zeiss/LEO scanning electron microscopes, FE-SEMs & FIB systems. Made from ultra-pure aluminum with a standard lathe finish.
Head: 38 mm
Pin height: 6 mm
Pin diameter: 1/8"
Electron Microscopy Sciences SEM Hitachi M4 45°, 5/8" head, 3/8" height, Aluminum
45 degree SEM specimen mount with aluminum slotted head for use with Hitachi. Made from ultra-pure aluminum.
Head: 5/8"
Height: 3/8"
Electron Microscopy Sciences JEOL SEM Cylinder Mount 1" surface, 3/8" height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1"
Height: 3/8"
Electron Microscopy Sciences Miller Squares Graticle NE57, 25 mm, 9:1 Large to small square
The ratio of large to small squares is 9:1. Originally designed for hematology, they can be utilized for rapid counting of any evenly spread field of particle. References: American J. of Clin. Pathol. Vol.20, 1950, page 1079. "Time Saving Device For Counting Reticulocyte." G.Brescher and Schneiderman. Practicle Haemotology – J.D. Dacy. Published by J.A. Churchill. 2nd Edition 1956 page 25.
Size: 25 mm
Divisions: 9:1 Large to small square
Surface: Glass sandwich
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 38 mm head with 6 mm Pin, Aluminum, 1/8" Pin diameter
SEM stub specimen mount with shorter pin (6 mm) and 38 mm slotted head for use with Zeiss/LEO scanning electron microscopes, FE-SEMs & FIB systems. Made from ultra-pure aluminum with a standard lathe finish.
Head: 38 mm
Pin height: 6 mm
Pin diameter: 1/8"